Deep Groove Ball Bearings-Product Center-Lianda Bearing

English 丨 España

WhatsApp : +8613562082015 Email : sale1@ldtnbearing.com

PRODUCT CENTER

+86-13963552245

Mobile

+8613562082015

sale1@ldtnbearing.com

6300 Series

Single row deep groove ball bearing housings are the most widely used bearing types: 1. Basic design of open bearing 2. Sealed bearings 3. ICOS oil-sealed bearing unit

6000 Series

Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.

6400 Series

The basic designs of single row deep groove ball bearings are open and sealed. For manufacturing reasons, open bearings of the same size as sealed or dust-proof bearings may also have seal grooves in the outer ring. Bearings with shields or seals on both sides are maintenance-free, lubricated for life. Such bearings cannot be cleaned and the temperature cannot exceed 80 degrees Celsius.

Double Row

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. The design of double row deep groove ball bearings is basically the same as that of single row deep groove ball bearings. The deep groove ball shaft-shaped raceway plus the excellent tightness between the raceway and the steel ball.For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62xx and 63xx series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).

6200 Series

Single row deep groove ball bearing is the most representative structure of rolling bearings and has a wide range of uses. The raceways located on the inner ring and the outer ring have an arc cross section with a radius slightly larger than the radius of the rolling ball. In addition to bearing radial load, it can also bear axial load in two directions. Low friction torque, most suitable for applications requiring high speed rotation, low noise and low vibration. This kind of bearing, in addition to the open type, also has a bearing with a steel plate dust cover, a bearing with a rubber seal, or a bearing with a snap ring attached to the outer diameter of the outer ring. Generally, steel stamping cages are used. Mainly applicable cage: steel stamping cage (wave shape, crown shape...single row; S shape...double row)

< 1 2 >

Mobile : +86-13963552245
Email : sale1@ldtnbearing.com

WhatsApp :+8613562082015

Add : Tangyuan Town, Linqing City, Liaocheng City, Shandong Province

WeChat

GET A FREE QUOTE