WhatsApp : +8613562082015 Email : sale1@ldtnbearing.com
-
PRODUCT CENTER
Product types of deep groove ball bearings
Release time:
2023-09-28
Deep groove ball bearings are mainly used to withstand radial loads, but they are also commonly used to withstand combined radial and axial loads. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing.
Deep groove ball bearings are mainly used to withstand radial loads, but they are also commonly used to withstand combined radial and axial loads. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing. The models of deep groove ball bearings include: deep groove ball bearings (60000 type); Deep groove ball bearings with stop grooves on the outer ring (60000N type); A deep groove ball bearing with a dust cover on one side and a stop groove on the outer ring on the other side (60000-ZN type); Deep groove ball bearings with dust covers on both sides and stop grooves on the outer ring (60000-2ZN type); Deep groove ball bearing with dust cover on one side (60000Z type); Deep groove ball bearings with dust covers on both sides (60000-2Z type); Deep groove ball bearings with sealing rings on one side (60000-LS and 60000-RZ types); Deep groove ball bearings with sealing rings on both sides (60000-2LS and 60000-2RZ types); Flange outer ring deep groove ball bearing (F60000 type); Flange outer ring deep groove ball bearing with dust cover on one side (F60000-Z type); There are 11 types of flange outer ring deep groove ball bearings (F60000-2Z type) with dust covers on both sides. [2]
According to the size of deep groove ball bearings, they can be divided into:
(1) Micro bearings - bearings with a nominal outer diameter range of less than 26mm;
(2) Small bearings - bearings with a nominal outer diameter range of 28-55mm;
(3) Small and medium-sized bearings - bearings with a nominal outer diameter size range of 60-115mm;
(4) Medium and large bearings - Bearings with a nominal outer diameter size range of 120-190mm
(5) Large bearings - bearings with a nominal outer diameter size range of 200-430mm;
(6) Extra large bearings - bearings with a nominal outer diameter range of 440mm or more.
LATEST NEWS
Excavator bearings play a crucial role in the production and maintenance of excavators. As a critical component, these bearings are responsible for supporting the load and enabling smooth rotation of various moving parts in the excavator, such as the boom, arm, and bucket.
2024-01-29
Disassembly method of needle bearing
The knocking force is generally applied to the inner ring of the bearing, and the knocking force of the shielding machine room should not be applied to the rolling element and cage of the bearing. This method is simple and easy to operate, but it can easily damage the bearing. When the bearing is located at the end of the shaft, use a copper rod or other soft metal material smaller than the inner diameter of the bearing to support the shaft end, and add a cushion block to the lower part of the bearing. Gently tap with a hammer to remove it. When applying this method, attention should be paid to the appropriate position of the cushion blocks and the correct point of application.
2023-09-28
Application of tapered roller bearings
Tapered roller bearings have tapered inner and outer raceways, with tapered rollers arranged between them. The projection lines of all conical surfaces converge at the same point on the bearing axis. This design makes tapered roller bearings particularly suitable for bearing composite (radial and axial) loads. The axial load capacity of bearings is mostly determined by the contact angle α Determined; α The larger the angle, the higher the axial load capacity. The angle size is represented by the calculation coefficient e; The larger the e-value, the greater the contact angle, and the greater the applicability of the bearing to withstand axial loads.
2023-09-28
The dismantling of bearings is a regular maintenance process, which is carried out during bearing replacement. After disassembly, if it is necessary to continue using or check the condition of the bearings, the disassembly should also be carried out with the same care as during installation. Pay attention not to damage the various parts of the bearing, especially the disassembly of interference fit bearings, which is difficult to operate.
2023-09-28
Method for Adjusting the Radial Clearance of Cylindrical Roller Bearings
For multi oil wedge tilting bearing pads, it is not allowed to repair or scrape the pads. When the clearance is not suitable, the pads should be replaced. For pads with adjustable thickness, the amount of pads can be adjusted by adding a stainless steel pad under the adjustment block at the back of the pad, or by thinning the thickness of the adjustment block. Note that for multi oil wedge tilting bearing pads, the thickness error between the same set of pads should be less than 0.01mm.
2023-09-28
CONTACT US
Mobile : +86-13963552245
Email : sale1@ldtnbearing.com
WhatsApp :+8613562082015
Add : Tangyuan Town, Linqing City, Liaocheng City, Shandong Province
GET A FREE QUOTE
Copyright : Lianda Bearing Co., Ltd. Powerby : 300.cn jinan2 BUSINESS LICENSE SEO